KUHN FC243, Руководство оператора

Страница: 66 / 72

Mower conditioner
64
FC243
Maintenance and storage
5. Storage
„
At the end of each season
- Clean the machine thoroughly.
- Drain all gearboxes and cutterbar and refill with new
oil (see "Lubrication" chapter).
- Touch up paint if necessary.
- Put the machine under cover in a dry place.
- Inspect and replace worn knives and bolts (See
section: Inspection of knives and securing elements).
- Inspect and replace worn or damaged fingers on the
conditioning rotor.
- Slacken V-belts and check their condition.
- Depressurize all hydraulic functions.
„
At the start of each season
- Pressurize the hydraulic circuit.
- Check the condition of the friction slip clutch (see
"Secondary pto shaft" chapter).
- Inspect and replace worn knives and bolts (See
chapter: Inspection of knives and securing elements).
- Check that all nuts and bolts are sufficiently tightened.
- Read through the operator's manual again.
- Retension V-belts.
- Check belt guard condition and if it is firmly secured in
place.
- Make sure that all protection devices are in place and
good condition.