KUHN FC243, Руководство оператора

Страница: 44 / 72

Mower conditioner
42
FC243
Instructions for work
- Reinstall bolts and washers without tightening them.
- Reinstall belts on pulleys.
- Reinstall belt tensioning bolt and washer on its
support.
- Tighten belt tensioning bolt using box spanner until
the spring is completely compressed.
- Tighten pulley bolts using box spanner:
- Torque to 12 daN m (89 lbf ft).
- Reinstall the belt guard.
- Check that the guard is engaged inside the rigid beld
guard.
- Tighten the self-locking nuts using box spanner.
- Pivot guardrail tube.
- Tighten self-locking nut of pivoting guardrail using box
spanner.
Handle pulleys with care.
Pulleys must slide on their respective shafts
without effort. If this is not the case, clean
and coat the mating surfaces with grease
before sliding the pulleys on their shafts.
Refer to the pictorial applied on the machine to
check the pulley position with regards to the rotor
speed.