KUHN EL 142, Руководство по сборке и эксплуатации

Страница: 29 / 52

- 27 -
3) FRONT GAUGE WHEELS
(photo 36)
Kit no 121 6640
The EL 142 can be equipped with a gauge wheel kit.
Wheels (R) are fitted on cross tube (T) in front of the
machine. This equipment is recommended either in
Cultirotor version when no roller is fitted, or for all
versions combined with a roller in order to improve the
machine’s stability.
Wheels (R) can easily be adjusted in height inside
their supports using pins (B).
Handles (A) make it easier to handle the gauge
wheels (R).
IMPORTANT NOTE CONCERNING THE USE OF
FRONT GAUGE WHEELS
When the EL 142 is used with front gauge wheels
combined with a roller, the tractor top link must be
connected to the oblong hole (O) on the machine’s 3-
point frame (photo 37). With this method of hitching
the machine adapts freely to the ground contours,
independently of the tractor.
Coupling the top link to the oblong hole (O) on the machines headstock is only intended for
work. It is strictly forbidden to use this hole during transportation.
36
37
NOTE : - When mounting the front wheels, slide guards (P) (photo 36) so that they cover the complete
front part of the machine located at the exterior of the 3-point frame’s mounting yokes (C). The
gap between guards (P) and the wheels columns (R) must be of less than 60 mm.
- In addition, on 230 and 250 models, dismount the front safety guard inner part on each side
of the headstock in order to obtain the space required to fit the front gauge wheels.