KUHN EL 142, Руководство по сборке и эксплуатации

Страница: 14 / 52

- 12 -
The safety guards increase the safety of the machine.
The 2 front safety guards (P) are made up of 3 parts,
one fixed and 2 sliding sections. They are factory
fitted as shown on photo 1.
The sliding sections of the safety guards may need to
be repositioned (front wheels, track eradicators…).
Whatever the accessories the machine is equipped
with, the guards must remain fixed and cover the
whole length of the machine from the outside of the
adjustable lower link brackets (C) (photo 1).
GUARDS
1) Front safety guards
1
2) Side safety guards
To reduce the machine width for road transport, proceed as follows :
- loosen the screws (A) of guards (B) (photos 2 and 3)
- pivot guards (B) upwards (photos 2 and 3),
- tighten screws (A).
3) Guard extension
Fit the guard extension (1) over the sheet metal guard
(2) of the torque limiter (see photo 6).
Side guards (B) are safety
elements, they must be always
folded downwards at work (pho-
tos 4 and 5).
6
3
5
2
4