KUHN BKE 280 SUPER, Руководство оператора, Страница: 55 / 72

Maintenance and storage
Shredders
BKE 280-305 SUPER
53
Check cutting tools before each use in order to:
• ensure shredding quality.
• guarantee safety in use.
• avoid risk of damaging the fixing elements.
Replace cutting tools in the following cases:
- Damaged cutting tools:
• Very uneven ground can cause the knives to crack
or warp.
- Important wear.
Universal knives
- The length (L1) of the universal knives must exceed
90 mm (3.54’’).
- Ovalisation of the mounting hole L2 must not exceed
18 mm (0.71’’).
Hammer knives
- The cutting tool length L1 must exceed
90 mm (3.54’’).
- Ovalisation of the mounting hole L2 must not exceed
18 mm (0.71’’).
Fixing elements
- Check the condition of the fixing elements regularly
and also the torque of the knife-fixing bolt.
• Torque: 10.5 daN m (77.4 lbf ft).
- Check the fixing elements:
• After hitting an obstacle.
• When knives are replaced.
• At the start of each season.
- The fixing bolts should be changed in the following
cases:
• When there is visible distortion.
• When the thread is damaged or worn.
• When a groove (H) of over 2 mm (0.08’’) has
developed.