KUHN BKE 280 SUPER, Руководство оператора, Страница: 45 / 72

Instructions for work
Shredders
BKE 280-305 SUPER
43
2. Adjustments in working position
Working height
The working height is set by the position of the rear
support unit.
With roller:
- Slightly lift the machine from the ground.
- Loosen bolts (1)(2)(3).
- Remove screw ((3)).
- Proceed the same way on the other side
- Position roller in holes corresponding to the required
adjustment.
- Reinstall bolts (3).
- Tighten bolts (2) and (3)
• Torque: 13.5 daN m (99 lbf ft)
- Tighten screws (1)
• Torque: 21 daN m (155 lbf ft)
The cutting tools must never touch the
ground.
Relationship between the working height and the
roller position:
- Hole (a) = 30 mm (1.2’’).
- Hole (b) = 60 mm (2.4’’).
- Hole (c) = 86 mm (3.4’’).
- Hole (d) = 110 mm (4.3’’).
- Hole (e) = 131 mm (5.2’’).