KUHN BKE 280 SUPER, Руководство оператора

Страница: 18 / 72

Shredders
16
BKE 280-305 SUPER
Safety
electrical circuit. Also disconnect alternator and battery
terminals.
Repairs on elements under pressure or tension (springs,
pressure accumulators, etc.) must only be carried out by
competent persons with regulation equipment.
Wear the appropriate protective clothing for the work in
hand (gloves, shoes, goggles, helmet, ear defenders,
etc.).
Do not solder, weld or use a blow torch near fluids under
pressure or inflammable products.
For your own safety and for correct machine operation,
only use original manufacturer parts.
It is strongly recommended to have your machine
checked by your Kuhn dealer after each season,
especially tools and their attaching hardware.
Projection of stones and foreign objects
For driver safety, always use a tractor equipped with a
cab. Keep the ground to be shredded free from foreign
objects. Avoid using the shredder on stony or rocky
ground. If this is not possible, take extra safety
precautions, such as:
- Fit polycarbonate screens inside the tractor cab's side
and rear windows, or install narrow mesh guards on
their exterior.
- Increase the cutting height to avoid contact with
stones or rocks.
Never start the shredder when there are people nearby.
Even when the machine is used in accordance with its
purpose, objects may be projected. Stones and other
foreign objects projected by the moving parts can travel
a considerable distance. Keep all persons and animals
away from the danger zone.
The guard plates/covers on the machine help reduce the
risks of projection. Therefore, make sure that all
shredder protection devices are in place and good
condition prior to using the machine.
Regularly check the condition of the guard plates/covers.
Immediatly replace any worn, damaged or missing
guard plate/cover.
Precautions for machine use
Before using the shredder, inspect shredding tools
(knives, rotors) and their attachment hardware in
accordance with the instructions given in the present
manual. Immediatly replace any worn, damaged or
missing guard plate/cover. Before engaging the pto
drive, lower the shredder onto the ground. For your
safety, only use genuine parts !