KUHN ALTERNA 400, Руководство оператора

Страница: 68 / 80

Mower conditioner
66
ALTERNA400
Maintenance and storage
Checking cutterbar oil level
Periodically check the cutterbar oil level:
- Park the machine on an even fairly level ground.
- Remove filler plug (1) and (2) as well as their seals.
- Through filler plugs, check that the oil level (h) is
comprised between 7 and 8 mm (0.27’’ - 0.31’’).
• Top up if necessary.
- Clean and reinstall filler plugs and their seals (1) and
(2). Replace if necessary.
Before checking that the discs rotate freely by hand:
If in doubt as to the oil quantity contained in
the cutterbar, fully drain and refill cutterbar
respecting recommended oil quantity and
quality.
If it is found that the transmission case is very hot
to touch by hand, there is no cause of alarm
provided:
- Lubrication recommendations have been
respected.
- Discs can be rotated freely by hand when
the machine is hot
.
Turn off the engine, remove ignition key and
wait until all moving parts have come to a
complete stop.