KUHN ALTERNA 400, Руководство оператора

Страница: 39 / 80

Putting into service
Mower conditioner
ALTERNA400
37
Adjusting the braking system
The braking system is mounted and adjusted either at
the factory or by your Kuhn dealer. No adjustment is
required.
Contact your Kuhn dealer for any service operation.
Adjustment of the stroke end sensor for
right hand mowing position
Drawbar shift cylinder
The measure (X) is factory set at 557 mm (1’9’’).
The drawbar shift cylinder enables placing the machine
in 3 different positions:
- Intermediate position (a) for right hand mowing
position: X = 557 mm (1’9’’).
- Open position (b) for transport.
- Closed position (c) for left hand mowing position.
When measure (X) does not correspond to the factory
setting:
- Loosen counter nut (1).
- Tighten or loosen the sliding rod so that measure (X)
equals 557 mm (1’9’’).
- Tighten counter nut (1).