Subject to modifications
Electrical adjustment of spreading pattern (option)
-
To adjust the spreading pattern, please press the middle turning knob
-
and press the turning knob in pressed down position.
The
symbol shows the displacement of the spreading image position.
By turning the pressed turning knob clockwise, the spreading image is displaced to the right side seen from direction of
travel. A turning movement anti-clockwise displaces the spreading image to the left side.
Spreading image position
If the set position of the spreading pattern adjustment is changed, the new position is only reached
during spreading. During operating status , the spreading pattern adjustment does not
change its position.
For each operator level,
or
it is possible to set a different position for the electrical adjustment of the
spreading pattern. During level change, the set value is adopted to the level memory. The set value is assigned to the
currently set user level.
During first assembly, fixed values are determined and saved for the left, middle and right point. Smaller or larger steps
can be defined for the displacement of the spreading pattern to the left side compared to the displacement to the right
side. The two positions lying in between are calculated from these saved values.
If the left shift key is pressed, the actual value for the adjustment of the spreading pattern appears
in the middle of the spreading pattern display.
Theoretically, the actual value of the spreading pattern position can take
values between 0 and 255.
With a small value, the position of the spreading image is displaced to the left side. With a
large value, the position of the spreading image is displaced to the right side. The actual values are limited by the
mechanical limits of the spreading image adjustment
26 Control system k-tronic
E
ngl
is
h
