Subject to modifications
Output rates
The output rates indicate the spreading density in grammes per square metre (g/m²) separately for each chamber.
The output rates for the left and right spreading chamber can be set to different values.
If different spreading materials exist in the chambers, it is possible to set any desired mixing ratio of both spreading materials.
The mixing ratio can be adjusted to the respective road conditions at any time, even while driving. As soon as you have
set the appropriate mixing ratio for operation, you can lock the chambers against each other (see paragraph “Locking of
chambers”).
Output rate for left chamber
( )
The output quantity for the left chamber can be set at the left turning knob.
The increments per turning knob detent as well as the upper and lower limit can be set in the menu.
Output rate for right chamber
( )
The output quantity for the right chamber can be set at the right turning knob.
The increments per turning knob detent as well as the upper and lower limit can be set in the menu.
Sum of output quantities (
)
Display of sum of both chambers in grammes per square metre (g/m²). In case of pre-wetted salt equipment, the
proportional weight of brine is included (see paragraph “part of brine”).
Display only during spreading operation. At pause, “PAUSE” is displayed at this point.
When working with locked chambers, the sum of the output quantities is written in large numbers and the output
quantities of the left and right chamber is written in small numbers (see paragraph “Locking of chambers”).
For the output quantities of each spreading material, it is possible to set individual values for minimum, maximum and
step width per turning knob detent.
Operating instructions 15
E
ngl
is
h
