Chisel Replacement - Removal
1. Remove the set screw (#8) & top screw
(#11) from the side of the Main Body(#9).
2. Remove top chisel(#10), then
Operate the pump to advance
the chisel until fully extended.
3. Remove the smaller set screw (#3) from the same hole in the
side of the Main Body (#9).
4. Retract the piston to separate the chisel from the piston. Pull
the chisel out of the Main Body.
ATTENTION
Proper wrenches with correct specifications
are required for replacing chisels, or the
product might be damaged.
Refer to the page of component list for
the specifications of wrenches and
screws for all models of splitters.
13 KuDos Mechanical Co., Ltd.
Содержание HYNC Series
Страница 5: ...Diagram of Components 4 KuDos Mechanical Co Ltd ...
Страница 10: ...Model Specifications 9 KuDos Mechanical Co Ltd ...
Страница 11: ...KuDos Mechanical Co Ltd 10 ...