KUDOS HYNC Series, Инструкции по безопасной эксплуатации и техническому обслуживанию

Страница: 13 / 16

Operating Instructions
1. Position the splitter on the nut. Make sure the nut is squared nicely at
the top of the splitter tool head. Improper positioning of the splitter on
the nut might cause damages to the chisel.
2. Hold the splitter in place and operate the pump until the chisel cuts
through the nut. Stop the pump immediately after the nut is split to avoid
damages to the bolt threads.
3. Retract the chisel and lift the splitter off the nut.
4. If the nut cannot be removed after one cut, position the splitter on the side
opposite (180°) the first split and the operation repeated.
5. Turn off the pump after the nut is split and the chisel is retracted completely.
6. Dismount the couplers and the hose and replace the dustcaps to all
couplers. If the couplers cannot be dismounted, release the internal
pressure from the pump.
The flat surface of the
splitter must rest flush
(90°) against one of the
nut flats, and the head
must rest on a flat
surface.
KuDos Mechanical Co., Ltd 12