KUDOS HYNC Series, Инструкции по безопасной эксплуатации и техническому обслуживанию

Страница: 8 / 16

Trouble-Shooting
■
Failure to split nuts:
4. The hardness or size of applied nuts might exceed equipment ratings.
4. The chisel is worn or damaged and must be replaced. Splitting nuts with
a worn or damaged chisel might cause property damage or even personal
injury.
4. The pump output might be insufficient.
4. Internal leakages of hydraulic fluid: Contact your KuDos® service
representatives.
■
Insufficient operating pressure: (less than 700bar or 10,000psi)
1. Secure the couplers properly to prevent restricted oil flow.
2. Inspect the pump output for possible pressure losses. Do not use your
fingers when looking for fluid leaks.
3. Test the pump to ensure it reaches 700 bar pressure. Never adjust the
pump relief valve over 700 bar.
■
Replace any worn or damaged parts immediately, especially the
chisels. Do not use parts not supplied by Kudos.
■
Contact KuDos® service representatives to request parts or for
problems not shown above.
■
Do NOT attempt to disassemble or repair the product.
■
Kudos hydraulic tools must be serviced by a qualified technician.
Contact your Kudos® representative for more information.
7 KuDos Mechanical Co., Ltd.