KUDOS HYCP-400, Инструкции по безопасной эксплуатации и техническому обслуживанию

Страница: 16 / 16

Trouble-Shooting
Ϯ
Compression of lugs cannot be implemented.
A. Insufficient hydraulic fluid : Routine refill or renewal of hydraulic
fluid is required.
B. Internal leakage: Contact KuDos® service representatives.
ϡ
ϡ ϡ
ϡ
Do NOT attempt to disassemble or repair the product.
C. Operation instructions were not followed. The product or dies have
been alreaady damaged.
D. Applied cables or terminals are over-specification.
Ϯ Moving handle is stuck or is unable to rotate to release the pressure.
A. Clean the moving handle to remove impediments.
B. Contact KuDos® service representatives for stuck torsional spring.
ϡ ϡ ϡ ϡ Do NOT attempt to disassemble or repair the product.
C. Pressure can be released by pressing down the release lever
manually.
Ϯ
Dies can not be set in place or can not be removed.
A. Deformed C-head or dies. Contact KuDos® service representatives.
ϡ ϡ ϡ ϡ Do NOT attempt to disassemble or repair the product.
B. Clean the grooves on C-head to remove impediments.
C. Clean the die seats on C-head to remove impediments.
Ϯʳ
The piston is stuck or is unable to retract after operation. The piston
might be deformed by uneven stress distribution when the product was
operated with off-center cables and terminal. Contact with KuDos®
service representatives.
ϡ
ϡ ϡ
ϡ
Do NOT attempt to disassemble or repair the product.
KuDos Industrial Inc. U.S.A. Page: 8