KUDOS HYCP-400, Инструкции по безопасной эксплуатации и техническому обслуживанию

Страница: 14 / 16

Operation Manual - II
1. Release the hydraulic fluid pressure
and retract the piston before placing
dies
Κ
Pull out the moving handle
and rotate it clockwisely, press down
the release lever by pushing down
the moving handle, release the moving
handle and the product is ready to
work when the piston returns to its
starting position.
2. To place the upper die, pull up the spring pin ( #40) and push the
die into the open of C-head along its groove.
3. To place the lower die, press down the arresting pin ( #74) and push
the die into the open of C-head along its groove.
KuDos Industrial Inc. U.S.A. Page: 6