23
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
To protect the appliance finish,only use a sponge,soft cloth,fibrous or plastic
brush,and pad for cleaning.
Allow all components to dry thoroughly before using the range top.
Gas Range top Conversion and Adjustment Guide
The range top is set for use with Natural Gas(NG).(The factory setting is
indicated on the serial plate.When set for Natural Gas(NG) Gas operation,the
pressure regulator will regulate the gas to 4”inches water column pressure.When
set for Liquefied Propane Gas(LPG)operation,the pressure regulator will regulate
the pressure to 11”inches water column
NG to LPG Conversion
Convertible Pressure Regulator
The range tops are shipped to operate on Natural Gas(NG).Propane(LPG)
orifices are shipped with the unit in a separate envelope with the manual.Save the
NG or if ices removed from the appliance for future use,make sure you note
which orifices are for which burner if you plan on converting back to NG.
The inlet pressure of the gas supply shall be in accordance with the nominal inlet
pressure of the regulator used on the range top or 1/2 psig maximum.The range
top should be tested by pressurizingtheregulatorwithaninletpressureatleast1inch
water column above the manufacturer's specified manifold pressure shown on the
serial plate.
1. Shut off gas leading to appliance.
2. Unplug any electrical connections if you are using the 110V
option,usually located under the range top.
3. Locate convertible regulator at the back of the range top,remove cap.
Cap located here– back right of
range top while facing it.
