FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
6
Installation Instructions
Be sure the range top is properly in stalled and grounded by a qualified technician.It is
the responsibility of the technician to make certain that your range top is properly
installed. Situations cause by improper installation are not covered under the
warranty.Any expenses incurred due to such situations will not be paid by the
manufacturer of the range top.
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions,or according to local building codes and gas regulations in your area.
GAS CONNECTIONS (All Units)
NOT ICE TO MASSACHUSETTS APPLIANCE DEALERS:
Be sure this document is included in all gas range top appliances sold to consumers in
the State of Massachusetts.
NOTICE:Massachusetts law requires the following:
Appliances must be installed by a licensed plumber or gas fitter.
Appliances must be connected with a three(3)foot(36”maximum length)
Flexible gas connect or and
A“T” handle type manual gas valve in the gas supply line to the appliance
.
Have the dealer where you purchase your new range top install it or have them
recommend a qualified installer.Installation must conform with local codes.In the
absence of local codes,the installation must conform with the National Fuel Gas
Code,A NSIZ223.1-Latest Edition in the U.S.A.or the CAN/CGAB149.1or.2
Installation Codes in Canada.
The range top should be connected to the supply line with 1/2-inch black iron
pipe or a certified flexible type stove connector.Top revent gas leaks,put an
approved sealing compound which is resistant to liquefied petroleum gases on all
threaded connections.
Important:
Do not apply pressure directly to the range top manifold pipe when
tightening supply connections. The manifold pipe should be held securely at the
pressure regulator to prevent twisting.Hold the pressure regulator with a wrench
during the tightening of the connection,or the manifold pipe may be twisted and
split and cause a dangerous leak.
The installation of range tops designed for manufactured(mobile)home installation
must conform with the Manufactured Construction and Safety,Title 24 CFR,Part
3280,[formerly the Federal standard for Mobile Home Construction and Safety,
Title 24,HUD(Part 280)]in the U.S.A.or C.S.A.Standard CAN/CGAZ240.4.2in
Canada or,when such standards are not applicable,with local codes.
