Kubota ZD1211, Руководство оператора

Страница: 46 / 113

OPERATING THE MACHINE 26
ENGLISH
Machine speed and steering is controlled by the motion
control levers, when the engine is running and the parking
brake is released.
To avoid serious injury or death:
A
No control is provided by the motion control
levers when the engine is off.
C
Neutral position
A
Hold the motion control levers and move them inward
from the "NEUTRAL LOCK" position so that the
machine is in "NEUTRAL". (Engine cannot be
restarted.)
C
Forward and Reverse Motion:
Refer to the following figures.
1. Move throttle lever to the "FAST" position.
2. Release the parking brake.
3. Move both motion control levers from the "NEUTRAL
LOCK" position inward to the "NEUTRAL" position.
4. To move forward:
Push the control levers slowly forward.
To move reverse:
Pull both control levers slowly rearward at the same
time to start reverse motion.
To stop:
Move by hand and hold both motion control levers to
the "NEUTRAL" position until the machine comes to a
stop.
To avoid serious injury or death:
A
The motion control lever adjustment is
important to ensure the machine operates
properly.
A
The motion control linkages are adjustable.
If adjustment is required, see "ADJUSTMENT"
section. We recommend you to contact your local
KUBOTA Dealer.
C
Re-start on slopes
To avoid serious injury or death:
A Do not stop or change directions on slopes.
These operations could cause loss of the
machine traction or control.
Starting procedure on slopes is different from
the usual start mode on a flat surface,
understand how to re-start on slopes and use
extra caution.
If a situation occurs where it is necessary to stop and re-
start on a slope, refer to the following operational steps.
How to re-start on the slopes:
1. Firmly apply parking brake (enough to prevent
movement).
2. Start the engine.
3. Set the throttle lever to the middle position.
4. Place the control levers inward to the "NEUTRAL"
position gradually.
Operating position
(1) Motion control levers (A) "NEUTRAL" position
(B) "NEUTRAL LOCK" position
(1) Motion control lever
(2) Parking brake pedal