Kubota ZD1211, Руководство оператора

Страница: 14 / 113

SAFE OPERATION
-
6
ENGLISH
9. Keep first aid kit and fire extinguisher handy at all
times.
10. Do not remove the radiator cap while coolant is hot.
When cool, slowly rotate cap to the first stop and allow
sufficient time for excess pressure to escape before
removing the cap completely. If the machine has a
coolant recovery tank, add coolant there instead of the
radiator.
11. Do not attempt to mount a tire on a rim unless qualified
to do so and all proper safety precautions are followed.
Never allow untrained personnel to service machine.
12. Always maintain the correct tire inflation pressure. Do
not inflate tires above the recommended pressure
shown in the Operator's Manual.
13. Provide adequate support when changing wheels.
14. Make sure that wheel nuts and bolts have been
tightened to the specified torque.
15. Escaping hydraulic fluid under pressure has sufficient
force to penetrate the skin causing serious personal
injury. Before disconnecting lines, be sure to relieve all
pressure. Before applying pressure to the system,
make sure all connections are tight and that lines,
pipes, and hoses are not damaged.
16.Fluid escaping from pinholes may be invisible. Use a
piece of cardboard or wood to search for suspected
leaks: do not use hands. Use safety goggles or other
eye protection.
If you get injured by escaping fluid, see a medical
doctor at once. Serious infection or reaction will result
if proper medical treatment is not administered
immediately. This fluid can produce gangrene or
severe allergic reaction.
17.Keep hands and feet away from moving parts. If
possible, do not make adjustments or repairs with the
engine running.
18.Keep machine free of grass, leaves, or other debris
build-up.
19.Do not change the engine governor setting or
overspeed the engine.
20.Do not run a machine inside a closed area.
21.Mower blades are sharp and can cut your hands. Wrap
the blade(s) or wear gloves, and use extra caution
when servicing them. Never straighten or weld blades.
22.Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
23.Never tamper with safety devices. Check their
operation for proper function regularly.
(1) Cardboard
(2) Hydraulic line
(3) Magnifying glass