Kubota ZD1211, Руководство оператора

Страница: 57 / 113

37 TIRES AND WHEELS
ENGLISH
TIRES AND WHEELS
TIRES
To avoid serious injury or death:
A Do not attempt to mount a tire. This must be
done by a qualified person with the proper
equipment.
A
Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A
Inflation pressure in tires rises quickly when
using compressed air.
To avoid serious injury or death:
A
Never operate machine with a loose rim, wheel,
or axle.
A
Whenever bolts are loosened, retighten to
specified torque.
A
Check all bolts frequently and keep them
tightened.
B Inflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it and inflate as necessary.
WHEELS
A
When re-fitting a wheel, tighten the wheel bolt to the
following torques then recheck after traveling 200 m
(200 yards) changing directions several times.
Wheels with beveled or tapered holes:
Use the tapered wheel bolt.
Tire sizes
Recommended
Inflation Pressure
Front
15 x 6.5 - 8,
Smooth
semi-pneumatic
Low profile tire
- - -
Rear
26 x 12.0 - 16,
4PR Turf
Low profile tire
83 kPa
(0.84 kgf/cm , 12 psi)
(1) Ground (A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"