Kubota M7131, Руководство оператора

Страница: 257 / 298

225 PERIODIC SERVICE
B
Cleaning Fuel Solenoid Pump Element
1. Close the fuel shutoff-valve.
2. Unscrew the cover's nut and remove the cover from
the fuel solenoid pump.
3. Remove the cover, magnet, and element and clean
with kerosene.
4. Refer to the diagram below and reassemble the parts
as they were before.
5. Open the fuel shutoff-valve.
A When assembling the parts, be careful that no dirt or
dust contacts them.
A
Be sure to install the cover securely.
A After assembly, be sure to bleed the air from the fuel
system. (See "Bleeding Fuel System" in "SERVICE
AS REQUIRED" in "PERIODIC SERVICE".)
INITIAL 500 HOURS
B
Changing Transmission Fluid
(See "Changing Transmission Fluid" in "EVERY 1000
HOURS" in "PERIODIC SERVICE" section for this
service.)
B
Changing Rear Axle Case Oil
(See "Changing Rear Axle Case Oil" in "EVERY 1000
HOURS" in "PERIODIC SERVICE" section for this
service.)
B
Replacing Transmission Oil Filter
(See "Replacing Transmission Oil Filter" in "EVERY 1000
HOURS" in "PERIODIC SERVICE" section for this
service.)
(1) Fuel solenoid pump
(1) Element
(2) Magnet
(3) Gasket
(4) Cover
(5) Nut (A)
(B)
(C) "TIGHTEN"
"LOOSEN"
Pin
"Tighten the cover until the end
of the slot contacts the pin."
With a new machine, be sure to do the servicing, as
discussed below, after the first 500 operating hours.