OPERATING THE TRACTOR
128
STOPPING
B
Stopping
1. Slow down the engine.
2. Step on the clutch and brake pedal.
3. After the tractor has stopped, disengage the PTO,
lower the implement to the ground, shift the
transmission to neutral, release the clutch pedal, and
set the parking brake.
CHECK DURING DRIVING
B
Engine Over-speed Limiting Indicator
The Engine Overspeed Limiting Indicator informs the
operator of engine overspeed by indicator and warning
buzzer.
If the warning sounds, immediately lower engine rpm with
brakes, etc. When the engine rpm decreases, the warning
will stop.
A
Normal operation will not lead to overspeed, but, for
instance, if suddenly shifting down when running with
a trailer at full speed, the tractor will be pushed by the
trailer and may go into overspeed.
B
Gear Shifting Warning Indicator
[Standard, Premium models]
As in the table below, if gear shifting does not operate as
desired, the operator will be informed by indicator and
warning buzzer.
If the warning sounds, immediately stop the tractor and
begin operation again. Upon correct operation, the
warning will stop.
B
Immediately Stop the Engine if:
A
The engine suddenly slows down or accelerates,
A
Unusual noises are suddenly heard,
A
Exhaust fumes suddenly become very dark,
(1) Engine over-speed limiting indicator
Gear Shifting
Measures
When running at high engine rpm
in a low-speed gear, range gear
was shifted to slow-down, but
returned to the original gear
without shifting.
1) Lower the engine
rpm and shift
down.
2) Shift down with
the power shift.
Range gear was shifted (rev-up/
slow-down), but returned to the
original gear without shifting.
At high rpm, range gear was
shifted from B to A in the slow-
down direction, but returned to
the original gear without shifting.
Lower the engine
rpm and shift gears
again.
When running at D-4 speed with
the creep gear ON, the gear
cannot be shifted to E-1.
Switch the creep
gear shift to OFF.
Range gear was shifted to E or F
with the creep gear ON.
(1) Gear shifting warning indicator
Содержание M7131
