Kubota M7-132, Руководство оператора

Страница: 73 / 332

Types of information displayed on the performance monitor
Selected
screen
Display Remarks
Reference
page
1/6
Travel speed
• The “Average travel speed” is based on the speed since the last
reset action was performed.
• With the “Average travel speed” displayed and selected, hold
down [SET UP/00] switch. The setting goes back to [0.00] .
NOTE :
• The travel speed displayed does not account for wheel slip.
---
Average travel
speed
---
Engine rpm ---
Memory A rpm 139
Memory B rpm 139
Upper-limit rpm
setting
139
2/6
Instantaneous
loading factor
• The “Average loading factor” is measured based on the loading
factor from the previous resetting.
• With the “Average loading factor” displayed and selected, hold
down [SET UP/00] switch. The setting goes back to [0] .
• The “Instantaneous loading factor graph” displays the instanta-
neous loading factor in real time (a bar extending farther to the
right shows a higher load).
---
Average loading
factor
---
Instantaneous
loading factor
graph
---
Rear PTO rpm
92
193
Front PTO rpm (if
equipped) 92
199
Instantaneous fuel
consumption
• The “Instantaneous fuel consumption” is measured per hour.
• The “Average fuel consumption” is measured per hour from the
previous resetting.
• With the “Average fuel consumption” displayed and selected,
hold down [SET UP/00] switch. The setting goes back to [0.0] .
---
3/6
Average fuel con-
sumption
---
Mileage graph ---
Total fuel consump-
tion
• Displays the total fuel consumption measured from the previous
resetting.
• The maximum value which can be displayed is 999 gallons or
999 litres.
• With the “Total fuel consumption” displayed and selected, hold
down [SET UP/00] switch. The setting goes back to [0.0] .
---
Instantaneous work
area fuel consump-
tion
• The “Average work area fuel consumption” is measured based
on the fuel consumption from the previous resetting.
• With the “Average work area fuel consumption” displayed and
selected, hold down [SET UP/00] switch. The setting goes back
to [0.0] .
• Preset the implement width. If not preset correctly, incorrect da-
ta will be displayed.
(See Initial setting on page 116.)
62
Average work area
fuel consumption
62
(Continued)
LIQUID CRYSTAL DISPLAY (LCD) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
67