Kubota M7-132, Руководство оператора

Страница: 210 / 332

(A) “UNLOCK”
(B) “LOCK”
Adjusting the lower link’s width
The 3-point link of this tractor is of Category III. The
lower link is 1010 mm (40 in) wide as a standard.
Do not turn the adjusting handle unless otherwise
necessary. The lower link’s width may get out of spec.
The guideline is that the groove is visible. Finally, return
the handle to its storage position.
(1) Lock cover
(2) Stabiliser rod
(3) Adjusting handle (A) “GROOVE”
(B) “STORAGE POSITION”
9. Quick hitch (hook type)
WARNING
To avoid personal injury or death:
Confirm the below when installing the implement:
• Make sure the hook of the quick hitch is
securely locked.
The 3-point hitch with quick-hitch consists of a pair of
lower links and a top link, all of which have claw ends
that permit rapid attaching and detaching of
implements.
9.1 Installing ball-joint to implement
1. Before the implement is installed on the 3-point
hitch with quick hitches, it is necessary to install the
ball-joints to the implement according to the
following instructions.
(1) Plain ball-joint (for upper hitch pin)
(2) Ball-joint (for lower hitch pin)
3-POINT HITCH AND DRAWBAR THE 3-POINT HITCH SETUP
204
M7132, M7152, M7172