Kubota M7-132, Руководство оператора

Страница: 193 / 332

(1) Headland management system lock indicator
(2) Program code display indicator
(3) Headland management system lock and unlock switch
(4) Program select switch
NOTE :
• The headland management system is kept
locked all the time when the engine gets
started. To enable this system, press the
headland management system lock and unlock
switch to unlock it.
• While the program is being executed, the
manually operated levers and switches can be
used. If the opposite operation takes place
while the program is running, however, the
program run is interrupted.
For example, the program is interrupted if the 3-
point quick lower switch is used and then the 3-
point quick raise switch is pressed.
• Before turning on the PTO shaft, use the PTO
gear shift lever to select the PTO shaft speed
(540 or 1000 rpm) in advance.
• Before using the remote control valves, set the
remote control valve switch to the neutral
position.
• Work can also be started, pressing the “Field
in” button as the first step.
Field in and out buttons
When the indicators of both buttons are on, press either
of the buttons to activate the headland management
system.
With the headland
management sys-
tem lock/unlock
switch at lock posi-
tion
Indicators of both buttons: “OFF”
With the headland
management sys-
tem program ready
to run
Indicators of both buttons: “ON”
With the field out
button pressed and
the program run-
ning
Indicator of field out button: “ON”
Indicator of field in button: “OFF”
(1) Field out button
(2) Field in button
(3) Indicator
HEADLAND MANAGEMENT SYSTEM OPERATING THE TRACTOR
M7132, M7152, M7172
187