Kubota M7-132, Руководство оператора

Страница: 312 / 332

Engine con-
trol unit
Error or warning code
Type of trouble Action
SPN FMI
VCU2 521011 9
Signal error; remote control valve
switch.
Check if the remote control valve switch is stuck.
If the message persists after the switch is released,
contact your dealer.
VCU2 522004 7
Operational error for PTO lever
and PTO switch.
Ensure the PTO gear shift lever and PTO operating
mode select lever position are not in neutral posi-
tion, when the PTO switch is on.
VCU2 522005 9
Signal error; external rear PTO
switch left is kept being pressed.
Check if the external rear PTO switch left is stuck.
If the message persists after the switch is released,
contact your dealer.
VCU2 522006 9
Signal error; external rear PTO
switch right.
Check if external rear PTO switch right is stuck.
If the message persists after the switch is released,
contact your dealer.
VCU2 522007 9 Signal error; rear PTO switch.
Check if the rear PTO switch is stuck.
If the message persists after the switch is released,
contact your dealer.
VCU2 522015 9 Signal error; front PTO switch.
Check if the front PTO switch is stuck.
If the message persists after the switch is released,
contact your dealer.
VCU2 522017 3 or 4 Wheel angle sensor error.
Wheel angle sensor or wiring may be defective;
contact your dealer.
VCU2 522029 2, 3, 4, 5 or 9
Shuttle lever forward position er-
ror.
This happens when the shuttle lever is held in for-
ward position for a long time.
If the problem persists, contact your dealer.
VCU2 522030 2, 3, 4, 5 or 9
Shuttle lever reverse position er-
ror.
This happens when the shuttle lever is held in re-
verse position for a long time.
If the problem persists, contact your dealer.
VCU2 522031 2, 3, 4, 5 or 9
Shuttle lever neutral position er-
ror.
This happens when the shuttle lever is held in neu-
tral position (lever down) for a long time.
Please stop the engine once, and restart. If the
problem persists, contact your dealer.
VCU2 522032 2, 3 or 9 Shuttle lever safety position error.
This happens when the shuttle lever is held in safe-
ty position (lever up) for a long time.
If the problem persists, contact your dealer.
VCU2 522034 24
No record input of headland man-
agement system.
When programming the headland management sys-
tem, push the recording button again and operate
the tractor.
VCU2 522035 25
Headland management system
operation is being stopped. Replay headland management system during driv-
ing.
VCU2 522035 26
Headland management system
operation is being stopped.
Check if the rear hitch is blocked.
Replay headland management system after releas-
ing the hydraulic block.
VCU2 522078 3 or 4
Front suspension stroke sensor
error. Front suspension sensor or wiring may be defective;
contact your dealer.
VCU2 522078 13
Front suspension stroke sensor
error. Front suspension sensor or wiring may be defective;
contact your dealer.
VCU2 522081 9
Signal error; front suspension au-
to mode switch.
Check if the front suspension auto mode switch was
held in on for a long time.
Otherwise, contact your dealer.
VCU2 522082 3
Signal error; front suspension
block mode switch.
Check if the front suspension block mode switch
was held in on for a long time.
Otherwise, contact your dealer.
VCU2 522083 3
Signal error; front suspension
“UP” switch.
Check if the front suspension “UP” switch was held
in on for a long time.
Otherwise, contact your dealer.
(Continued)
TROUBLESHOOTING
306
M7132, M7152, M7172