Kubota LA1954, Руководство оператора

Страница: 39 / 50

OPERATING THE LOADER 28
B
Euro type coupler
This Euro type coupler is designed to be used with
attachments that comply with ISO 23206 standard
published 2005. This Euro type coupler allows the
operator to change easily without the use of tools.
To avoid serious personal injury or death:
A
Use of a non-Kubota attachment that does not
comply with ISO 23206 standard or the
improper positioning of handle or non-
protrusion of pin(s) may result in detachment
of the attachment or deformation, causing loss
of performance, personal injury or death.
A
Attachments should be located on a flat, firm surface
when attaching and detaching them from the quick
attach coupler.
1. To mount an implement, shift the handle of the quick
attach coupler pin to the unlocked position. Tilt the
quick attach coupler forward slightly.
2. Adjust the quick attach coupler angle as shown in the
figure. Drive the tractor forward slowly to position the
quick attach coupler under the attachment hooks. Now
these hooks are visible from the direction of arrow.
3. When the quick attach coupler comes in contact with
the attachment, raise the loader to hook the
implement. Then shift to the roll back position
completely to engage the locking system.
To avoid serious personal injury or death:
A
Make sure the handle contacts the guide bar at
the point (A).
A
Make sure both lock pins (LH, RH) protrude
through both pin holes.
To avoid personal injury or machine damage:
A Never operate or transport implements which
are not attached completely.
A
Always replace damaged hardware
immediately.
(1) Handle
(2) Pin
(1) Handle
(2) Guide bar
(3) Pin holes
(4) Lock pin (A) The handle contacts the
guide bar at this point.