Kubota LA1954 Скачать руководство пользователя страница 33

Страница: 33 / 50

OPERATING THE LOADER

The torque for the lock nut is very important. If the nut
is over tightened the adjusting screw may break.

Do not adjust the main relief valve, otherwise it would
damage hydraulic pumps.

FRONT REMOTE HYDRAULIC CONTROL

SYSTEM (if equipped)

This system can be used for a front mounted hydraulic
implement, as it provides hydraulic oil to the front outlet
directly.

Install the Coupler

1. Remove the cap from the front hydraulic outlet.
2. Install the hydraulic quick coupler as required.

Control Switch

1. Front hydraulic valve main switch

Push the front hydraulic valve main switch (1) to
engage the front hydraulic valve.
A light on the switch will illuminate to indicate that the
front hydraulic valve is on, and to enable the activation
switch (2).

2. Activation switch

(1) When pressing the "A" button, hydraulic oil will

come out of Port A and return through Port B as
long as the switch is pressed.

(2) When pressing the "B" button hydraulic oil will

come out of Port B and return through Port A as
long as the switch is pressed.

3. Push the front hydraulic valve main switch again to

disengage the front hydraulic valve, and the light of the
front hydraulic valve main switch will turn off.

(1) Front hydraulic outlet
(2) Hydraulic quick coupler (Not included in this kit)

Содержание LA1954



















































Результаты поиска

Содержание LA1954

Отзывы:

Похожие инструкции для LA1954

Бренды по названию

Популярные бренды

Kubota LA1954, Руководство оператора

Результаты поиска

Содержание LA1954

Отзывы:

Похожие инструкции для LA1954

Бренды по названию

Популярные бренды