Kubota LA1954 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 50

background image

23

OPERATING THE LOADER

A

While a front mounted hydraulic attachment is used,
make sure the hydraulic hose is routed out of contact
with the left and right bucket links. (Keep the hose from
running over within the circled zone in the figure
below.)

To avoid personal injury:

A

Valve lock does not lock out switch operated
third-function hydraulics, which are active
when the key switch and the front hydraulic
valve main switch are ON.

B

Remote Control Coupler Connecting and

Disconnecting

To avoid personal injury:

A

Stop the engine and relieve pressure before
connecting or disconnecting lines.

A

Do not use your hand to check for leaks.

C

Relieve Hydraulic Pressure

1. Move the key switch to the "RUN" position.

A

Don't start the engine.

2. Push the front hydraulic valve main switch "ON".
3. Press the activation switch A and B several times.
4. Push the front hydraulic valve main switch "OFF".
5. Turn the key switch to the "OFF" position.

C

Connecting

1. Clean both couplers.
2. Remove dust plugs.
3. Insert the implement coupler to the tractor hydraulic

coupler.

4. Pull the implement coupler slightly to make sure

couplers are firmly connected.

C

Disconnecting

1. Lower the implement first to the ground to release

hydraulic pressure in the hoses.

2. Clean the couplers.
3. Press the "Activation switch" a couple of times to

relieve hydraulic pressure.
Pull the hose straight from the hydraulic coupler to
release it.

4. Clean oil and dust from the coupler, and then replace

the dust plugs.

A

Your local KUBOTA dealer can supply parts to adapt
couplers to hydraulic hoses.

(1) Front hydraulic valve main switch
(2) Activation switch

(C) Front hydraulic valve main switch "OFF"
(D) Front hydraulic valve main switch "ON"

«
...
32
33
34
35
36
...
»

Содержание LA1954



















































Отзывы:

Нет отзывов

Похожие инструкции для LA1954

Бренд: Komatsu Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды