Kubota LA1954, Руководство оператора

Страница: 25 / 50

OPERATING THE LOADER 14
OPERATING WITH FLOAT CONTROL
During operation on hard surfaces, keep the bucket level
and put the lift control in the float position to permit the
bucket to float on the working surfaces.
If hydraulic down pressure is exerted on the bucket it will
wear faster than normal.
The float position will also avoid mixing of surface material
with stockpile material. The float position will reduce the
chance of surface gouging while removing snow or other
material, or when working with a blade.
LOADING FROM A BANK
Choose a forward gear that provides a safe ground speed
and power for loading.
To avoid serious personal injury:
A Be extra careful when working on inclines.
A
When operating on a slope, always operate up
and down the slope, never across the slope.
A
Loader lift and break-away capacity diminish as
loading height is increased.
Side cutting is a good technique for cutting down a big
pile. Wheel width should not exceed the bucket width for
this procedure.
If the pile sides are too high and liable to cause cave-in,
use the loader to break down the sides until a slot can be
cut over the top.
Another method for large dirt piles is to build a ramp to
approach the pile.
It is important to keep the bucket level when approaching
a bank or pile. This will help avoid gouging the work area.