Kubota L47TL, Руководство оператора, Страница: 95 / 159

69 PTO
A Tractor engine will not start if the PTO clutch control
switch is in the engaged "ON" position.
B
Stationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brakes and place blocks at the tires.
2. Make sure the shift levers are at NEUTRAL, and start
the engine.
3. Set the PTO clutch control switch to engage "ON".
4. Set the engine speed to provide recommended rear
PTO speed.
5. Unlock the seat lock lever.
6. Turn the seat counterclockwise. (for backhoe
operation)
7. Dismount the seat.
A If the PTO system is engaged and you stand up from
the seat before you turn the seat counterclockwise, the
engine stops automatically after standing up.
B IntelliPanel(TM) Message
1. The PTO rpm can be checked in the display.
(See "INTELLIPANEL(TM)" in "OPERATING THE
TRACTOR" section.)
2. When the PTO system gets engaged (ON), the
indicator lights up.
A
Rear PTO "ON"
Engine Speed
rpm
Shaft
PTO Speed
rpm
2700 6-Spline 540
(1) PTO clutch control switch
(2) Seat lock lever (A) "ON"
(B) "UNLOCK"
(1) Display
(2) PTO indicator