Kubota K-Hitch AP-KH15 Скачать руководство пользователя страница 23

Страница: 23 / 32

Section 3: Maintenance & Lubrication

AP-KH15 K-Hitch® 320-135MK

9/21/22

Table of Contents

Maintenance

Proper servicing and adjustment are key to the long life of

any implement. With careful inspection and routine

maintenance you can avoid costly downtime and repair.
After using your K-Hitch for several hours, check all bolts

to ensure they are tight. Replace any worn, damaged, or

illegible safety labels by obtaining new labels from your

Kubota dealer.

DANGER

To avoid serious injury or death:
Always disconnect driveline from the tractor before servicing

the drivetrain and components powered by the drivetrain. A

person can become entangled in the drivetrain if the tractor is

started and the power take-off is engaged.

WARNING

To avoid serious injury or death:

•

Make sure controls are all in neutral position or park before

starting the power machine.

•

Always shut tractor down using “Tractor Shutdown

Procedure” provided in this manual before servicing,

adjusting, cleaning, or maintaining this implement.

•

Perform scheduled maintenance. Check for loose

hardware, missing parts, broken parts, structural cracks,

and excessive wear. Make repairs before putting the

equipment back into service.

•

Do not alter implement or replace parts on the implement

with other brands. Other brands may not fit properly or

meet OEM (Original Equipment Manufacturer)

specifications. They can weaken the integrity and impair the

safety, function, performance, and life of the implement.

Replace parts only with genuine OEM parts.

Long-Term Storage

Clean, inspect, service, and make necessary repairs to

the implement when storing it for long periods and at the

end of the season. This will help to ensure the unit is

ready for field use the next time you connect to it.
1. Clean off any dirt and grease that may have

accumulated on the K-Hitch and moving parts.

Scrape off compacted dirt and then wash surface

thoroughly with a garden hose. A coating of oil may

also be added to any unpainted areas.

2. Inspect for loose hardware, and damaged or worn

parts.

•

Tighten all loose hardware.

•

Replace damaged and worn parts as needed.

3. Repaint parts where paint is worn or scratched to

prevent rust. Ask your Kubota dealer for touch-up

paint. Paint is available in aerosol can, touch-up

bottle, quart, and gallon sizes. See chart below.

4. Replace all damaged or missing decals.
5. Lubricate as noted in

“Lubrication Points”

on page

20.

Touch-Up Paint

Part No.

Part Description

821-066C

PAINT ORANGE SPRAY CAN

821-066CTU PAINT ORANGE BOTTLE & BRUSH
821-066CQT PAINT ORANGE QUART
821-066CGL PAINT ORANGE GALLON

Section 3: Maintenance & Lubrication

Содержание K-Hitch AP-KH15

































Результаты поиска

Содержание K-Hitch AP-KH15

Отзывы:

Бренды по названию

Популярные бренды

Kubota K-Hitch AP-KH15, Руководство оператора

Результаты поиска

Содержание K-Hitch AP-KH15

Отзывы:

Бренды по названию

Популярные бренды