－
14
－
Bill Validator related
Error
codes
Occurring Error
８０
Jammed bill
８１
Bill dispensing error
８２
Cashbox full
８３
Stacker error
８４
Identifier error
８５
Safety switch error
８６
Cashbox unlocked
８７
Bill extracted
Remove jammed bill.
Collect bill.
Close the lid.
Close back lid of the identifier.
Close the lid.
Leave it for 30 minutes, or open
and shut the lid.
Check for jammed bill.
Remove jammed bill.
Check for jammed bill.
Empty the cashbox.
Check that stacker lid is closed
correctly.
Check condition of the identifier.
Check that cashbox lid is closed
correctly.
Detected bill extraction , check
for jammed bill.
Check if the bill could be properly accepted and
returned.
Error code cleared.
Check point
Action
Recovery verification
Sold-out
columns
―
Error
codes
Occurring Error
９０
９１
９６
500
501
502
503
504
505
506
550
552
555
560
565
559
564
569
574
Check point
Action
Recovery verification
Sold-out
columns
―
Cooling unit failure
Heating unit failure
Door switch error
Clogged condenser
warning
HOT / COLD setting
error
Compartment 1 fan
failure
Compartment 2 fan
failure
Compartment 3 fan
failure
Compartment 4 fan
failure
Condenser Fan Failure
Condenser thermistor
error
External thermistor
error
Compartment 1
evaporator thermistor
error
Compartment 2
evaporator thermistor
error
Compartment 3
evaporator thermistor
error
Compartment 1
thermistor error
Compartment 2
thermistor error
Compartment 3
thermistor error
Compartment 4
thermistor error
Check slave control board
connector for disconnection.
Check refrigeration unit.
Check slave control board
connector for disconnection.
Check heating unit.
Check main door switch.
Check condition of the condenser.
Check HOT/COLD selection
switch.
Check harness and connectors
for disconnection.
Check compartment 1 fan motor.
Check compartment 2 fan motor.
Check compartment 3 fan motor.
Check compartment 4 fan motor.
Check condenser fan motor.
Check condenser thermistor
connector for disconnection.
Check condenser external
thermistor connector for
disconnection.
Check compartment 1
evaporator thermistor connector
for disconnection.
Check compartment 2
evaporator thermistor connector
for disconnection.
Check compartment 3
evaporator thermistor connector
for disconnection.
Check compartment 1 thermistor
connector for disconnection.
Check compartment 2 thermistor
connector for disconnection.
Check compartment 3 thermistor
connector for disconnection.
Check compartment 4 thermistor
connector for disconnection.
If there seems to be no problem,
replace the slave control board or
refrigeration unit.
If there seems to be no problem,
replace the slave control board or
heating unit.
If there seems to be no problem,
replace the main door switch.
Clean the condenser.
Redo setting correctly.
Reconnect harness.
Reconnect harness.
If there seems to be no problem,
replace fan motor.
(CAUTION: Always reset the
machine by switching the power
ON/OFF after corrective action.)
Reconnect harness.
If there seems to be no problem,
replace the thermistor.
(CAUTION: Always reset the
machine by switching the power
ON/OFF after corrective action.)
C
Relevant
columns
orresponding
Column
Similar error shall not occur within two days after
４２
Food ingredient health
error
Checking the temperature inside
the cooling chamber
Checking the inside chamber and
the middle door
Checking the malfunction code by opening the middle
door (opening angle above 30° for 3 seconds)
correction.
Similar error shall not occur within a day after
correction.
Error code shall respond to opening and closing of
the door.
Clear error code by pressing Diagnostics/Clear key on
the keyboard, or press Condenser Malfunction key.
Error code cleared.
Error codes and Corrective Actions
Cooling and heating system related
TPK
Vending
Corporation
Co.,
Ltd.
