-4-
1
2
3
4
Specified Key Operations
Sequential Test Vend
Proce
-dure
Key
Indication
Operation
Press Test Key three times.
Press Mode Key to begin testing.
Press Mode Key to cease testing.
Press Mode Key again to resume.
Press END Key to return to normal
operation.
Press END Key to return to normal
operation.
View/Clear Total Vend Count and Vend Count per Column
Proce
-dure
Key
Indication
Operation
Press Sales Count Key. Total
number of vends from product
purchase will be displayed.
Press Ten Key to select column.
Vend Count for the selected column
will be displayed.
Example : Column 7 123456 pcs
Press Diagnostics/Clear Key to clear
Total Vend Count and Vend Count
for all columns.
・
Skip procedure 4 if not clearing data.
・
"End" will appear on the display after shown data for the final column.
・
By clearing total vend count, count for total sales value and sales value per
column will be cleared at the same time.
・
If total vends exceed 6 digits, only the lower 6 digits will be displayed.
1
2
3
5
4
(Key Number0 ~ 9)
Press UP or DOWN Key to select
column number.
Press×
3
Press×
3
1
2
3
4
View/Clear Group Vend Count
Proce
-dure
Key
Indication
Operation
Press Sales Count Key three times.
Count of vends from product
purchase for the selected group will
be displayed.
Press UP or DOWN Key to select
group number.
Long press Diagnostics/Clear Key
to clear Vend Count for all groups.
Press END Key to return to normal
operation.
・
Skip procedure 3 if not clearing data.
・
"End" will appear on the display after shown data for the final group.
・
By clearing Group Vend Count, Group Sales Value will also be cleared at the same
time.
・
If total vends exceed 6 digits, only the lower 6 digits will be displayed.
“ ”
31/07/2015 12:34
T 567890
“ ”
31/07/2015 12:34
T 567890
“ ”
31/07/2015 12:34
T 567890
Sequential Test
Test 4
03 Count-Group
GC 1 123456
03 Count-Group
GC 2 123456
Sequential Test
Column 1
Sequential Test
Column 3
01 Count
TC 345678
CLR
0
CLR
0
01 Count-Column
Column 7 123456
01 Count-Column
Column 8 234567
1
2
3
5
4
1
2
4
3
1
2
6
3
4
5
Single Test Vend (Key Number 0
~
9)
Key
Indication
Operation
Press Test Key.
After inputting a column number
inTen Key, when Enter Key is
pressed, 1 piece of product of the
column will be vended.
When you need more products to
be dispensed, input a column
number first.
Press UP or DOWN Key to select
column number.
Press Mode Key, a product from
selected column will be vended.
Press END Key to return to the
normal operation.
・
Procedures 3 and 4 are unnecessary when test vending by Ten Key.
・
Test vending by Ten Key will become unavailable when procedure 3 is
performed.
・
How to cancel a single test vend
①
Leave it for 30 seconds, it will automatically be canceled.
②
Use the operation of “END” key.
Coin Test Vend (Key Number 0 ~ 9)
Proce
-dure
Key
Indication
Operation
Press Test Key.
Insert coin.
Product could be test vended.
Press END Key to return to normal
operation.
・
Coin test vend will not be included in the count.
Insert Coin
Press Mode Key to begin testing.
Press Mode Key to cease testing.
Press Mode Key again to resume.
Consecutive Test Vend
(Select column using remote keyboard
)
Proce
-dure
Key
Indication
Operation
Press Test Key twice.
Press UP or DOWN key to select
test column. Only one column could
be selected.
Press END Key to return to normal
operation.
・
Column selection by UP / DOWN Keys will become unavailable once column is
selected by selection buttons.
・
Test vending may be suspended for about 7
-
10 minutes to avoid overheating the
solenoid.
Test session will be ended in 1 vend
operations after sold out.
Press×2
“ ”
31/07/2015 12:34
T 567890
“ ”
31/07/2015 12:34
T 567890
Single Test
Test 1
Consecutive Test
Column 3
Consecutive Test
Column 3
Consecutive Test
Column 3
Consecutive Test
Column 3
Consecutive Test
Test 2
Single Test
Test 1
Single Test
Column
7
Proce
-dure
“ ”
31/
1 0
/2012 12:34
T 567890
TPK
Vending
Corporation
Co.,
Ltd.