Kubota CTL SVL97-2, Руководство оператора

Страница: 96 / 158

No. Check points Measures
Hour meter indicator
Interval
Ref.
page
50 250 500 1000 1500 2000 3000
58 Radiator system rinse every 2 years 119
59
Closed breather related rubber
piping
replace every 2 years 121
*3
60
DPF differential pressure sensor
rubber piping (Front and back)
replace every 2 years 122
*3
61
Suction pipe downstream the
AFS (Air flow sensor)
replace every 2 years 122
*3
62
Boost sensor pressure rubber
piping
replace every 2 years 122
*3
63 EGR cooler hose replace every 2 years 122
*3
64
Plastic parts and synthetic leath-
er
clean
service as re-
quired
122
IMPORTANT :
• Perform the job indicated by
◎
at the first operation.
• The listed items (@ marked) are registered as emission related critical parts by KUBOTA in the U.S.EPA non-road emission regula-
tion.
As the engine owner, you are responsible for the performance of the required maintenance on the engine according to the preceding
instruction.
Please see the Warranty Statement in detail.
• When using biodiesel, be sure to check the maintenance requirements of biodiesel fuel as the intervals will change in some of the
items.
*1 When using a hydraulic hammer, change hydraulic oil and return filter according to the table on Changing the hydraulic oil including replacing
the suction filter and the return filter in the hydraulic tank on page 114.
*2 Clean and replace the air cleaner element more frequently if used under dusty conditions. When the filter is very dirty from dusty conditions,
replace the filter.
*3 Consult your local KUBOTA dealer for this service.
Air-conditioner
No. Check points Measures
Hour meter indicator
Interval
Ref.
page
50 250 500 1000 1500 2000 3000
1 Air filter
clean ○ ○ ○ ○ ○ ○ every 250 hrs 109
*1
replace ○ ○ ○ every 1000 hrs -
*1
2 Air-conditioner condenser check ○ ○ ○ ○ ○ ○ every 250 hrs 110
3 Air-conditioner pipes and hose
check every 1 year 118
replace every 2 years 121
4 Refrigerant (gas) check
service as re-
quired
122
*1 Clean and replace the air cleaner element more frequently if used under dusty conditions. When the filter is very dirty from dusty conditions,
replace the filter.
OPENING AND CLOSING OF
COMPONENTS
1. Opening and closing the rear door
WARNING
To avoid personal injury or death:
• When opening the rear door, open it firmly to
the locked position.
• When opening and closing the rear door, be
careful not to get your hands or other parts of
your body caught.
Opening
1. Pull the lever and open the rear door.
2. Insert the pin into the locked position to fix the rear
door.
Closing
1. Be sure to close the engine hood before closing the
rear door.
2. Support the rear door by hand, remove the pin from
the locked position, and insert it into original
position.
3. Close the rear door firmly until the lever is fully
returned.
MAINTENANCE OPENING AND CLOSING OF COMPONENTS
90
SVL97-2