Kubota CTL SVL97-2, Руководство оператора

Страница: 80 / 158

3. Operating the attachment control
device (option)
You can use the attachment-control-device to feed
electrical power for an attachment. For instance, to
drive a valve.
With the AUX port ready for use, you can supply power.
Use K (+12 V) and B (GND) of the 14-pin coupler
attached on the arm. See the following figures and
table.
NOTE :
• The K (+12 V) of the 14-pin coupler turns on
when the starter switch is in [RUN] position.
(1) 14-pin coupler
1. Press the numbered electrical control switch on the
left or right lever that corresponds with the desired
valve function, to be powered at +12V.
(1) Ref. no. 1
(2) Ref. no. 2
(3) Ref. no. 3
(4) Ref. no. 4 (5) Ref. no. 5
(6) Ref. no. 6
(7) Ref. no. 7
(B) Pin port-B
(C) Pin port-C
(D) Pin port-D
(E) Pin port-E
(F) Pin port-F (G) Pin port-G
(H) Pin port-H
(J) Pin port-J
(K) Pin port-K
14-pin coupler harness connection chart
Ref. no. Pin port Remarks
- B GND
1 C AUX 1st func.
2 D AUX 1st func.
3 E AUX 2nd func.
4 F AUX 2nd func.
5 G AUX 3rd func.
6 H AUX 3rd func.
7 J AUX electrical mode change
- K +12 V
NOTE :
• AUX 3rd func. is momentary action.
• AUX electrical mode change is alternate
action.
AUXILIARY HYDRAULIC HOW TO USE THE AUXILIARY HYDRAULIC CONTROL
74
SVL97-2