Kubota CTL SVL97-2, Руководство оператора

Страница: 138 / 158

Error
Code
Number
Problem or Failure
Machine condition
Provisional measure and
Correction
Engine performance
Machine performance
Acceleration
limited
Engine out-
put limited
Engine stop-
ped
E:016
Auxiliary hydraulic control
system (Control switch on
the knob)
- - -
The auxiliary-hydraulic-con-
trol-system is not turned on.
The other functions of the
machine are still operative.
Immediately contact your lo-
cal dealer.
E:018
Auxiliary hydraulic control
system (Solenoid valve for
Rightward SW)
- - -
The auxiliary-hydraulic-con-
trol-system is not turned on.
The other functions of the
machine are still operative.
Immediately contact your lo-
cal dealer.
E:019
Auxiliary hydraulic control
system (Solenoid valve for
Leftward SW)
- - -
The auxiliary-hydraulic-con-
trol-system is not turned on.
The other functions of the
machine are still operative.
Immediately contact your lo-
cal dealer.
E:020
Electronic travel torque
management system
- - - The machine fails to move.
Immediately contact your lo-
cal dealer.
E:021
5 V power supply of the
sensor is short-circuited.
- - -
The majority of systems fail.
• The engine may be start-
ed and the machine may
move.
Do not try any jobs. Just
move the machine to a safe
place.
Immediately contact your lo-
cal dealer.
E:023
Error code number
“E:023”
appears if a jump-
er cable is connected to a
24 V battery or improper
device to jump start the
engine
- - -
Immediately stop using con-
nected device, and discon-
nect the 24 V battery. When
the engine gets restarted and
is running with no error code
number appearing, it means
there is no problem.
If the error code number
“E:023” still appears, immedi-
ately contact your local deal-
er.
E:024
Hydraulic temperature
sensor
- - -
The AUX high flow mode is
not available. Immediately contact your lo-
cal dealer.
E:026 CRS CAN communication ○ ○ - -
Immediately contact your lo-
cal dealer.
E: 027 ACU CAN communication ○ ○ - -
Immediately contact your lo-
cal dealer.
E:028 Acceleration system (foot)
◎
- -
The accelerator fails, but the
machine's other functions are
still operative. The machine is
operative at the idling rpm.
Move the machine to a place
suited for repair. Immediately
contact your local dealer.
E:9000
Requirement for the DPF
regeneration.
- - -
DPF must be regenerated,
but low engine rpm is unable
to start the DPF regeneration.
Rev up the engine rpm and
start the DPF regeneration.
If the error code number
“E:9000”
still appears, imme-
diately contact your local
dealer.
E:9001
Requirement for the DPF
regeneration.
-
◎
○
DPF must be regenerated,
but low engine rpm is unable
to start the DPF regeneration.
If you leave the machine with
the hydraulic locked, the en-
gine can stop automatically. Rev up the engine rpm and
start the DPF regeneration.
If the error code number
“E:9001” still appears, imme-
diately contact your local
dealer.
E:9002 DPF is regenerated. - ◎ - - -
E:9003
Requirement for the DPF
regeneration.
-
◎
-
DPF must be regenerated,
but unable to start the DPF
regeneration.
Immediately contact your lo-
cal dealer.
E:9004
Requirement for the DPF
replacement.
- ◎ - You must replace the DPF.
Immediately contact your lo-
cal dealer.
(Continued)
TROUBLESHOOTING
132
SVL97-2