Kubota CTL SVL97-2, Руководство оператора

Страница: 131 / 158

IMPORTANT :
• If the tracks are too tight, wear is increased.
• If the tracks are too loose, the track pads
may collide with the sprocket and wear is
increased.
The track may dislocate or come off.
• If the track tension is high due to sticking
mud, remove mud from the track.
3. After adjustment is completed, tighten the grease
fitting using the socket wrench.
You must keep the tightening torque as follows.
Tightening torque
Between 98 N
⋅
m to 108 N
⋅
m
(72.3 ft ⋅ lbf to 79.7 ft ⋅ lbf)
IMPORTANT :
If the seam of the track is positioned incorrectly,
the tracks will be tensioned too loosely, and a
further readjustment will be necessary.
1. Rotate the track after adjustment one to two
times to check the tension.
2. Additionally follow the following points when
adjusting rubber tracks.
• Check track tension 50 hours after initial
use and readjust if necessary.
• Check and adjust thereafter every 50 service
hours.
IMPORTANT :
• Clean the track after every use.
TRACK
SVL97-2
125