background image

1

SAFE OPERATION

SAFE OPERATION

Careful operation is your best insurance against an
accident.

Read and understand this manual carefully before
operating the tractor.

All operators, no matter how much experience they may
have, should read this and other related manuals before
operating the tractor or any implement attached to it. It is
the owner's obligation to instruct all operators in safe
operation. 

1. Know your equipment and its limitations. Read this

entire manual before attempting to start and operate
the tractor. 

2. Pay special attention to the danger, warning and

caution labels on the tractor. 

3. Do not operate tractor or any implement attached to it

while under the influence of alcohol, medication,
controlled substances or while fatigued.

4. Carefully check the vicinity before operating tractor or

any implement attached to it. Do not allow any
bystanders around or near tractor during operation.

5. Before allowing other people to use your tractor,

explain how to operate and have them read this
manual before operation. 

6. Never wear loose, torn, or bulky clothing around

tractor. It may catch on moving parts or controls,
leading to the risk of an accident. Use additional safety
items, e.g. hard hat, safety boots or shoes, eye and
hearing protection, gloves, etc., as appropriate or
required.

7. Do not allow passengers to ride on any part of the

tractor at anytime. The operator must remain in the
tractor seat during operation. 

8. Check brakes, clutch, and other mechanical parts for

improper adjustment and wear. Replace worn or
damaged parts promptly. Check the tightness of all
nuts and bolts regularly. (For further details, see
"MAINTENANCE" section.)

9. Keep your tractor clean. Dirt, grease, and trash build

up may contribute to fires and lead to personal injury.

10.Use only implements meeting the specifications listed

under "IMPLEMENT LIMITATIONS" in this manual or
implements approved by KUBOTA. 

11.Use proper weights on the front or rear of the tractor to

reduce the risk of upsets. When using the front loader,
put an implement or ballast on the 3-point hitch to
improve stability. Follow the safe operating
procedures specified in the implement or attachment
manual. 

12. Do not modify the tractor. Unauthorized modification

may affect the function of the tractor, which may result
in personal injury.

C

CAB, ROPS

1. KUBOTA recommends the use of a CAB or Roll Over

Protective Structures (ROPS) and seat belt in almost
all applications. This combination will reduce the risk
of serious injury or death, should the tractor be upset.
Check for overhead clearance which may interfere
with a CAB or ROPS.

2. Set parking brake and stop engine. Remove any

obstruction that may prevent raising or folding of the
ROPS. Do not allow any bystanders. Always perform
function from a stable position at the rear of the tractor.
Hold the top of the ROPS securely when raising or
folding. Make sure all pins are installed and locked.

3. If the CAB or ROPS is loosened or removed for any

reason, make sure that all parts are reinstalled
correctly before operating the tractor.

4. Never modify or repair any structural member of a

CAB or ROPS because welding, bending, drilling,
grinding, or cutting may weaken the structure.

5. A damaged CAB or ROPS structure must be replaced,

not repaired or revised.

6. If any structural member of the CAB or ROPS is

damaged, replace the entire structure at your local
KUBOTA Dealer.

7. If the tractor is equipped with a foldable ROPS it may

be temporarily folded down only when absolutely
necessary for areas with height constraints.
(There is no operator protection provided by the ROPS
in the folded position. For operator safety the ROPS
should be placed in the upright and locked position
and the seat belt fastened for all other operations.)

8. Always use the seat belt if the tractor has a CAB or

ROPS.
Do not use the seat belt if a foldable ROPS is down or
there is no ROPS. Check the seat belt regularly and
replace if frayed or damaged.

1. BEFORE OPERATING THE TRACTOR

Содержание B3300SU
















































































Отзывы: