Kubota B3300SU, Руководство оператора

Страница: 27 / 79

11 OPERATING THE ENGINE
C Check Easy Checker(TM) lamps:
1. When the key is turned "ON", lamps (3) (4) should
come on. If trouble should occur at any location while
the engine is running, the warning lamp corresponding
to that location comes on.
A
Daily checks with the Easy Checker(TM) only are not
sufficient. Never fail to conduct physical daily checks
carefully by referring to "DAILY CHECK" section.
(See "DAILY CHECK" in "PERIODIC SERVICE"
section.)
A
Glow plug indicator (5) comes on while engine is being
preheated.
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever "INCREASE"
"DECREASE"
7. Insert the key into the key switch and
turn it "ON".
(A) "OFF"
(B) "ON" (C) "PREHEAT"
(D) "START"
(1) Easy checker(TM)
(2) Key switch
(3) Engine oil pressure
(4) Electrical charge
(5) Glow plug indicator
8. Fully depress the clutch pedal, turn
the key to "PREHEAT" position and
hold it for about 2 to 3 seconds.
Temperature Preheating Time
Over 0 C (32 F) 2 to 3 sec.
0 to -5 C (32 to 23 F) 5 sec.
-5 to -15 C (23 to 5 F) 10 sec.