Kubota B3300SU, Руководство оператора

Страница: 41 / 79

25 PTO
PTO
PTO OPERATION
To avoid personal injury:
A
Disengage PTO, stop engine, and allow all
rotating components to come to a complete
stop before connecting, disconnecting,
adjusting, or cleaning any PTO driven
equipment.
B
Rear-PTO Gear Shift Lever
1. The tractor has a 540 rpm speed position.
2. PTO shifting needs clutch operation. Press the clutch
pedal down completely to stop the tractor movement
and any PTO driven equipment movement before
shifting the Rear-PTO gear shift lever.
A To avoid shock loads to the PTO, reduce engine
speed when engaging the PTO, then open the throttle
to the recommended speed:
A
To avoid damage of transmission, before shifting the
Rear-PTO gear shift lever, fully disengage the main
clutch.
A
There is a PTO-1 (540rpm) indicator mark on the
tachometer face.
A
Tractor engine will not start if Rear-PTO gear shift
lever is in "ON" (engaged) position.
B
PTO shaft Cover and Shaft Cap
Keep the PTO shaft cover in place at all times. Replace
the PTO shaft cap when the PTO is not in use. Before
connecting or disconnecting a drive shaft to PTO shaft, be
sure engine is "OFF" and raise up the PTO shaft cover.
Afterward be sure to return the PTO shaft cover to the
"NORMAL POSITION".
(1) Rear-PTO gear shift lever "ON" (Engaged)
"OFF" (Disengaged)
Engine Speed
rpm
Shaft
PTO Speed
rpm
2600 6-spline 540
(1) PTO shaft cover
(2) PTO shaft cap (A) "NORMAL POSITION"
(B) "RAISED POSITION"