manualshive.com logo in svg

Kubota B2791A, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Kubota B2791A Скачать руководство пользователя страница 5

SAFETY PRECAUTIONS 

OM 0336QH-A 

3

 

   

SAFETY FIRST 

This symbol, the industry's "Safety Alert Symbol", is used throughout this manual and on 
labels on the machine itself to warn of the possibility of personal injury. Read these 
instructions carefully. It is essential that you read the instructions and safety regulations 
before you attempt to assemble or use this unit. 

  DANGER :  

Indicates an immediate hazardous situation which, if not avoided, will  

 

         result in death or serious injury. 

  WARNING : 

Indicates a potentially hazardous situation which, if not avoided, could 

 

 

 result in death or serious injury. 

  CAUTION :

   Indicates a potentially hazardous situation which, if not avoided, may 

 

result in minor or moderate injury. 

 

IMPORTANT : 

Indicates that equipment or property damage could result if instructions 

 

are not followed. 

 

NOTE :

 

Gives helpful information. 

 

 

All products are designed to give safe, dependable service if they are operated and maintained 
according to instructions. 

Read and understand this manual before operation

.  It is the owner's 

responsibility to be certain anyone operating this product reads this manual, and all other applicable 
manuals, to become familiar with this equipment and all safety precautions. Failure to do so could result 
in serious personal injury or equipment damage. If you have any questions, consult your dealer. 

 

B

EFORE 

O

PERATION

 

Children

 

1. 

Tragic accidents can occur if the operator is 
not alert to the presence of children. Children 
are generally attracted to machines and the 
work being done. Never assume children will 
remain where you last saw them.  

2. 

Keep children out of the operating area and 
under the watchful eye of another responsible 
adult. 

3. 

Be alert and turn machine off if children enter 
the work area. 

4. 

Before and when backing, look behind for 
small children. 

5. 

Never carry children while operating the 
machine. They may fall off and be seriously 
injured or interfere with the safe operation of 
the machine. 

6. 

Never allow children to play on the machine or 
attachment even when they are turned off. 

7. 

Never allow children to operate the machine 
even under adult supervision. 

8. 

Use extra care when approaching blind 
corners, shrubs, trees, or other obstructions 
that might hide children from sight. 

 

Содержание B2791A













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды