KTS-Electronic GPA 1000 Скачать руководство пользователя страница 23

KTS-Electronic GPA 1000 

23 

 
 

7  System requirements and license agreements 

7.1  System requirements 

The  program  is  a  32-bit-application,  which  is  driven  under  Windows  98,  Windows 
2000,  Windows  NT,  Windows  XP  or  Windows  7.  As  minimum  requirements  for  the 
adequate use the PC should show the following configuration: 
 

  Processor with pulse frequency from 1000 MHz or more 

  Hard disc with approx. 10..20 MByte free storage space 

  Graphic card with a minimum resolution of 800 x 600 points 

  Bluetooth ability to the connection of the external measuring hardware 

 

7.2  License agreements 

The  program  KTS  3D  as  well  as  the  entire  accompanied  electronic  or  printed 
documentation is subject to the copyright of KTS-Electronic Co. If parts of the present 
license  regulations  should  show  alterations  or  expansions  opposite  the  license 
regulations for former program versions they will come into force from the beginning 
of the day of entry. 
 

The present license regulations become effective on May 1

st

, 2007. 

 
Through  the  utilization  of  the  software  the  user  agrees  to  the  present  license 
regulations.  The  right  of  use  automatically  will  cease  if  the  license  regulations  are 
ignored. 

7.3  Utilization regulations 

After  full  payment  of  the  invoice  amount  the  customer  is  allowed  to  a  not-exclusive 
right of usage of the program listed in the bill. This right is restricted to the owner of 
the  original  software.  Consequently,  the  software  can  be  used  only  on  one  single 
computer system at the same time. All present and future copyrights and/or industrial 
protection  rights  of  the  provided  programs  and  of  all  programs  derivative  from  it, 
program modules or in this context produced records remain at KTS-Electronic. 

7.4  Liability exclusions 

The  present  program  was  tested  carefully,  nevertheless  mistakes  are  not  to  be 
excluded.  No  guarantee  is  adopted  for  the  usability  of  the  program  to  a  certain 
purpose.  Especially,  no  liability  is  adopted  for  consequential  damages  as  well  as 
profit and asset losses, that could result from the application of the program as well 
as the affiliated documentation. 
 
Prices may change without notice. The same applies to changes any sort in software 
or documentation. 

Содержание GPA 1000


























Отзывы: