KTS-Electronic GPA 1000
10
The Bluetooth symbol
will appear
in the menu bar. Via right-click on this
symbol the
add a device
–window will
show all available Bluetooth devices
(it is necessary that GPA 1000 is
active and the green LED flashes).
Select
Ezurio Blu 2I
and click “Next”.
In the next window pick “Enter the
device’s pairing code”, insert the
password
“1234”
and go to “Next”
(the device will automatically instal the
suitable drivers). Finally click the
Close-button
to
conclude
the
procedure.
Click “Start”
“Computer”
“System Properties”
“Device Manager”
double-
click on “Ports (COM & LPT)”. Two subitems (Standard Serial over Bluetooth link) will
appear
– you should memorize the lower COMPORT number. After that open KTS
3D-Software
, click on “Options”
“Serial Interface” and choose the memorized
COMPORT and click “OK”. Restart the Software and the device will automactically
connect to the computer. You will recognize this if the LED lights up permanently.
GPA 1000 is now operational.
For further usage you only should notice that Bluetooth is active and the GPA 1000
device is turned on (above proceedings must not be repeated).
