NVT-E
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
42611 EN
12 of 27
4
Please observe protection
note ISO 16016.
Drawn:
2019-12-06 Pz/Bet
Replacing:
KTR-N dated 2019-02-14
Verified:
2019-12-06 Pz
Replaced by:
To prevent unauthorized modifications of settings on the device, it is possible to activate a button lock.
Lock key pad
Lock Device
Loc
0 - 999
Parameter
___
Basic ext. functions
Basic EF
b)EF
►
►
The button lock is activated if at least one digit is set > 0. While entering the data the active digit is marked with a
dot.
•
Open the parameter menu by pressing the button
:
•
Set the digit via the buttons
and
(0 to 9) and accept by pressing the button
.
The active digit shifts to the right by one digit.
•
Finally confirm the code by pressing the button
.
The device returns to the submenu.
Please note:
•
Enter 000 to deactivate the button lock.
Scaling of the display range is effected between the highest and
the lowest level of the float. The display accuracy and the
resolution for defining the switching outputs for the charging
level are affected by this scaling, too.
The factory setting of the switching point and the display is
shown in illustration 5:
A: Factory settings
1: Measuring range
A: Types with analogue output:
The factory setting provides for an ascending display with
the filling level rising so that 0% are displayed at the lowest
possible level and 100% at the highest possible level.
These values can be modified as described below.
Illustration 5
4
Operation
4.6 Amendment of basic settings
4.6.5 Activating/Deactivating button lock
4.6.6 Scaling of charging level
