TUNING THE CHASSIS
31
Rebound damping (All SX
‑
F models)
Comfort
14 clicks
Standard
12 clicks
Sport
10 clicks
Rebound damping (XC
‑
F)
Comfort
14 clicks
Standard
12 clicks
Sport
10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection covers
.
9.14
Handlebar position
0
0
B
B
0
0
A
A
800116-10
On the upper triple clamp, there are two holes at a distance of
to each other.
Hole distance A
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of
from the center.
Hole distance B
3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. In this way, the handlebar
can be mounted in the position that is most comfortable for the rider.
9.15
Adjusting the handlebar position
x
0
0
2
2
0
0
1
1
0
0
2
2
1
1
B00375-10
–
Remove the four screws
. Remove the handlebar clamp. Remove the handlebar
and lay it to one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
–
Remove screws
. Remove the handlebar support.
–
Place the handlebar support in the required position. Mount and tighten screws
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and evenly tighten the four screws
.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)
