KTM Freeride 250 R EU, Руководство пользователя

Страница: 52 / 115

12 SERVICE WORK ON THE CHASSIS
50
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that has been contaminated with
fuel. Store fuel properly in a suitable canister and keep away from children.
Preparatory work
–
Fold the seat up. ( p. 46)
Main work
–
Turn handle  of the fuel tap to the OFF position. (Figure C00897-10 p. 16)
–
Pull off the fuel hose.
Info
Remaining fuel may flow out of the fuel hose.
C00906-10
–
Remove the tube from the fuel tank breather.
–
Remove screws

on both sides.
–
Remove screw

.
B01718-10
–
Release hose clamp

.
–
Detach the intake flange from the carburetor.
–
Remove the fuel tank from above.
12.29 Installing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
–
Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no
fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.
–
The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with
the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with
soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.
B01718-11
Main work
–
Check the throttle cable routing. ( p. 55)
–
Make sure that the throttle cable or other cables or are not trapped or damaged.
–
Position the fuel tank.
–
Position the intake flange on the carburetor.
–
Tighten hose clamp

.
–
Connect the fuel hose.
Info
Route the cable and fuel line at a safe distance from the exhaust system.