KTM Freeride 250 R EU, Руководство пользователя, Страница: 76 / 115

15 ELECTRICAL SYSTEM
74
You can also use the battery charger to test the rest potential and starting ability of
the battery, and to test the alternator. With this device, you cannot overcharge the
battery.
Info
Only charge the battery with the specified battery charge.
Read the notes in the battery package.
–
Switch off the battery charger after charging and disconnect from the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
Finishing work
–
Install the battery. ( p. 72)
–
Install the shock absorber. ( p. 45)
–
Lock the seat. ( p. 46)
–
Remove the motorcycle from the lift stand. ( p. 38)
15.4 Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Fold the seat up. ( p. 46)
B01684-10
Main work
–
Remove protection cap

.
B01685-10
–
Remove the faulty main fuse

.
Info
A defective fuse is indicated by a burned-out fuse wire

.
A reserve fuse

is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109110) ( p. 98)
–
Check that the electrical equipment is functioning properly.
Tip
Insert the spare fuse so that it is available if needed.
–
Mount the protection cap.
Finishing work
–
Lock the seat. ( p. 46)