KTM Freeride 250 R EU, Руководство пользователя, Страница: 88 / 115

17 TUNING THE ENGINE
86
17.6 Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the driver's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
400692-10
–
Sit on the vehicle in the riding position and determine distance

between the
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot 10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever. ( p. 86)
17.7 Adjusting the basic position of the shift lever
401950-12
–
Remove screw

with the washer and remove the shift lever

.
401951-10
–
Clean gear teeth

of the shift lever and shift shaft.
–
Mount shift lever

on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Mount and tighten screw  with washer.
Guideline
Screw, shift lever M6 14 Nm
(10.3 lbf ft) Loctite ® 243™